Complete Ignition
Page 1 sur 1
Nice
Interesting system, have emailed them for some info on fitment to a Pantah. Would be nice to see a photo of how it mounts to the frt cam drive.
Regards. Mike.
Regards. Mike.
Invité- Invité
Re: Complete Ignition
miga2430 a écrit:Interesting system, have emailed them for some info on fitment to a Pantah. Would be nice to see a photo of how it mounts to the frt cam drive.
Regards. Mike.
when you'll have an answer, please, send a post.... :jesus:
Invité- Invité
Re: Complete Ignition
oui ca a l air pas mal ,moiu aussi je suis curieux a propos du montage sur la poulie de cyl. avant, surtout pour la plaque de capteur .(montage dans le couvercle ? ) ,
chez Ignitech en Tchequie il y a des trucs pas mal aussi , pour pas trop cher , des modules ,des capteurs ,des bobines... meme des trucs pour les injections aussi,
[Vous devez être inscrit et connecté pour voir ce lien]
chez Ignitech en Tchequie il y a des trucs pas mal aussi , pour pas trop cher , des modules ,des capteurs ,des bobines... meme des trucs pour les injections aussi,
[Vous devez être inscrit et connecté pour voir ce lien]
Invité- Invité
Re: Complete Ignition
Sorry for the late reply guys. Heres what they had to say...
Hello Mike
Our ignition used to mount the pickup behind the front cam pulley but
this has proved too expensive to manufacture as we had to cast and
machine a new support for the pickup.
We are currently re-designing the pickup mount point to be off of the
engine cam pulley shaft. We expect this to be available in Feb next
year. It will require removal or modification of the cam belt covers
but as this is normally done on race engines we figure this will be ok
for most customers.
Let me know if you want me to send pictures and info when we have
finished the development.
Kind regards
Ian Glover
Director
[Vous devez être inscrit et connecté pour voir ce lien]
So I suppose I`ll check back in Feb and hopefully get a photo . Seems not so bad a price too when consider you get a complete ignition system.
I really like the Ignitech TCIP4 system , also is good value for money.
Regards
Hello Mike
Our ignition used to mount the pickup behind the front cam pulley but
this has proved too expensive to manufacture as we had to cast and
machine a new support for the pickup.
We are currently re-designing the pickup mount point to be off of the
engine cam pulley shaft. We expect this to be available in Feb next
year. It will require removal or modification of the cam belt covers
but as this is normally done on race engines we figure this will be ok
for most customers.
Let me know if you want me to send pictures and info when we have
finished the development.
Kind regards
Ian Glover
Director
[Vous devez être inscrit et connecté pour voir ce lien]
So I suppose I`ll check back in Feb and hopefully get a photo . Seems not so bad a price too when consider you get a complete ignition system.
I really like the Ignitech TCIP4 system , also is good value for money.
Regards
Invité- Invité
Page 1 sur 1
Permission de ce forum:
Vous ne pouvez pas répondre aux sujets dans ce forum
|
|